Guide · Homeowners · 3 min read · Updated 16 November 2026
Switching to an Induction Hob or New Oven: Removing the Old One
Short answer
When upgrading to an induction hob or a new oven, the old appliance needs to be disconnected safely, removed and recycled. Gas hobs must be disconnected and capped by a Gas Safe registered engineer. Induction hobs often need a suitable dedicated circuit, so have an electrician check the wiring before you buy. Old appliances should go to an authorised recycling route as electrical waste.
Why people are switching
Induction hobs have become a popular upgrade. They heat pans directly using a magnetic field, are quick to respond, easy to clean and do not burn gas indoors. Many people switch when replacing a kitchen, when their old gas hob fails, or as part of moving away from gas altogether. New built-in ovens with features such as steam and pyrolytic self-cleaning are another common upgrade.
Whatever the reason, the old appliance has to come out safely and be disposed of correctly, and the new one needs suitable gas or electrical supply. Planning this before the new hob or oven arrives avoids delays on fitting day.
Disconnecting a gas hob
Any work on a gas appliance, including disconnecting a gas hob, must be done by a Gas Safe registered engineer. That is a legal requirement, not just advice. The engineer will turn off the supply, disconnect the hob and cap the gas pipe safely, and check there are no leaks. If you are leaving gas cooking altogether, ask whether the pipe should be capped further back, for example at the meter or a branch, depending on the layout.
Typical guide prices for a gas disconnection by an engineer are around £60–£95, depending on access and whether it can be done in the same visit as other gas work.
Electrical checks before installing induction
Induction hobs draw a lot of power, and many need a dedicated radial circuit of a suitable rating, run in cable of the right size, back to the consumer unit. A kitchen that previously had a gas hob may not have a suitable circuit. Some homes also have a single cooker circuit shared by an oven and a hob, which may not be enough for both a new induction hob and an electric oven.
Electrical work in homes in England and Wales must meet Part P of the Building Regulations, and new circuits are notifiable work, usually done by an electrician registered with a competent person scheme who can self-certify. Ask an electrician to check the existing supply before you buy the hob.
- Check the hob's power rating and the circuit it needs in the installation manual.
- Ask an electrician whether the existing cooker circuit is suitable.
- Check that there is a cooker isolation switch within reach of the hob.
- Measure the worktop cut-out and compare it with the new hob's dimensions.
- Check pans: induction only works with magnetic pans.
Removing built-in ovens and hobs
Built-in ovens are fixed into a housing unit with screws through the front frame. Once disconnected, the screws are removed and the oven slides forward, but it is heavy, often 30 to 40 kilograms, and awkward to hold. Hobs are clamped into the worktop from below and may be sealed with a strip of foam or silicone. Removing them without damaging the worktop takes care.
If the new hob is a different size, the worktop cut-out may need enlarging or a new worktop section fitted. Glass-ceramic hobs crack easily if levered out, so it is worth having experienced people remove them if you plan to sell or reuse the old hob.
| Appliance | Disconnection | Removal guide price |
|---|---|---|
| Gas hob | Gas Safe registered engineer | From £45 |
| Electric ceramic or induction hob | Electrician if hardwired | From £45 |
| Built-in single or double oven | Electrician if hardwired | £55–£85 |
| Freestanding cooker | Engineer or electrician depending on fuel | From £45 when disconnected |
| Range cooker | Engineer or electrician | £90–£160 |
Recycling the old appliance
Old hobs and ovens are electrical waste under the WEEE Regulations and should be taken to an authorised treatment facility, where steel, glass and electronic parts are separated and recovered. Retailers selling you a new hob or oven must offer a take-back option for a similar old item, although collection terms vary. Household waste recycling centres also accept them.
If the old appliance works and is in good condition, consider selling or donating it. Some furniture and appliance charities accept working ovens with a recent safety check.
Planning the fitting day
Book the gas engineer or electrician to disconnect the old appliance and check the supply a few days before the new one arrives. Arrange removal of the old appliance so it is out of the way when the fitter starts. Have the new appliance's installation manual to hand, and clear the area so the fitter can work safely.
If you are replacing a kitchen at the same time, coordinate with the kitchen fitter, who may already include appliance removal or know who to call.
Getting help
A removal service can take out built-in ovens, hobs and freestanding cookers, arrange disconnection by a Gas Safe registered engineer if needed and take everything away for recycling. Guide prices start from £45 for a hob and £55–£85 for a built-in oven, plus £60–£95 for gas disconnection.
Questions people also ask
Can I disconnect my gas hob myself?
No. In the UK, work on gas appliances must be done by a Gas Safe registered engineer. Disconnecting a gas hob yourself is illegal and dangerous. An engineer will disconnect the hob and cap the pipe safely.
Do I need a new circuit for an induction hob?
Often, yes. Many induction hobs need a dedicated circuit of a suitable rating. If you are replacing a gas hob or your existing cooker circuit also feeds an electric oven, an electrician should check whether it can cope before you buy.
What do I do with my old gas hob?
Once disconnected, take it to a household waste recycling centre, use the retailer's take-back service when buying a new hob, or book a collection. If it still works, you could sell or donate it.
Written and checked by the Cooker Disposal team. Read our editorial policy.
More guides
How Much Does Cooker Disposal Cost in the UK?
Cooker disposal in the UK costs from £45 for a freestanding cooker that is already disconnected and easy to reach. Built-in single or double ovens…
How to Disconnect a Cooker: Gas, Electric and Who Can Do It
A gas cooker must be disconnected and capped by a Gas Safe registered engineer under the Gas Safety (Installation and Use) Regulations 1998. A…
How to Get Rid of an Old Cooker: UK Options Compared
To get rid of an old cooker in the UK, use the retailer's take-back service when you buy a new one, book a council bulky waste collection, take it to…
Built-In Oven and Hob Removal: A Practical Guide
A built-in oven is removed by isolating its power, unscrewing it from the housing through the side trim, sliding it forward and disconnecting the…
Kitchen Refit Appliance Removal: A Preparation Checklist
Before a kitchen refit, book Gas Safe and electrical disconnections first, then schedule removal of the cooker, hob, oven, extractor, dishwasher,…
Council Bulky Waste Collection for Cookers: How It Compares
Most UK councils collect old cookers through their bulky waste service for a fee, usually with collection from the kerbside or front garden on a set…
Get a free cooker disposal quote
Tell us what you need and we'll come back with a clear price.
Request a quote