Guide · Homeowners · 3 min read · Updated 16 November 2026
Kitchen Refit Appliance Removal: A Preparation Checklist
Short answer
Before a kitchen refit, book Gas Safe and electrical disconnections first, then schedule removal of the cooker, hob, oven, extractor, dishwasher, washing machine and fridge for the day before the fitters start. Empty and defrost the fridge, drain the washing machine and dishwasher, and clear a route to the door. Removing everything in one visit costs far less per item than separate collections.
Why appliance removal needs planning
Kitchen fitters usually expect the room to be empty of appliances when they arrive, or they charge to deal with them. A cooker that is still connected to gas, a fridge that has not been defrosted or a washing machine full of water can hold up the first day of a refit. Getting the order right means one smooth visit instead of three rushed ones.
The work falls into two stages. First, the qualified trades make each appliance safe to move. Second, the removal team carries everything out and takes it for recycling. The checklist below sets out who does what and when.
The preparation checklist
Work through this list one to two weeks before the fitters arrive, so there is time to book trades and fix any surprises, such as a seized water valve or a gas pipe with no isolation point.
- Book a Gas Safe registered engineer to cap the gas cooker or hob
- Book an electrician to isolate any hardwired cooker, oven or induction hob
- Switch off and empty the fridge and freezer at least a day before collection
- Run the washing machine and dishwasher drain cycles and close the valves
- Remove shelves, trays, drawers and loose glass from every appliance
- Measure doorways and halls if you have a range cooker or American-style fridge freezer
- Clear a route from the kitchen to the front door and protect any new flooring
- Tell the removal team about integrated appliances and decor doors
- Keep any decor doors you want to reuse on the new appliances
Who disconnects what
Gas appliances must be disconnected by a Gas Safe registered engineer under the Gas Safety (Installation and Use) Regulations 1998. Hardwired electric cookers and hobs should be isolated by a competent electrician to BS 7671. Plumbed appliances such as washing machines and dishwashers can often be disconnected by the removal team, who isolate the valves, drain the hoses and cap the supply.
Fridges and freezers simply need switching off and emptying, unless they are plumbed for water and ice. Those need the water line isolated and capped as well.
| Appliance | Who makes it safe | What you can do beforehand |
|---|---|---|
| Gas cooker or hob | Gas Safe registered engineer | Book early, clear the area behind it |
| Hardwired electric cooker or hob | Competent electrician | Note which breaker controls it |
| Built-in oven on a plug | Householder or removal team | Remove shelves and trays |
| Washing machine or dishwasher | Removal team or plumber | Run drain cycle, close valves |
| Fridge freezer | Householder | Empty, defrost and dry out |
| Extractor hood | Electrician if hardwired | Remove grease filters |
Timing the removal
The best slot for removal is the day before the fitters start, or first thing on the first morning if the fitters agree. That keeps the old kitchen usable for as long as possible while making sure the room is clear when work begins. Allow time for the gas and electrical disconnections to happen first, ideally the same day or the day before.
If the old units are being stripped out by the fitters, check whether they are also removing appliances. Avoid paying twice, and avoid two teams each assuming the other will take the cooker. A quick message to both, confirming who removes which appliance, settles it.
Costs for a full kitchen strip-out
A full appliance strip-out is priced as one job rather than a list of single items. A freestanding cooker on its own starts from £45, built-in ovens cost £55–£85, hobs start from £45 and range cookers cost £90–£160. Combining several appliances brings the cost per item down considerably, because the team, van and recycling trip are shared.
Gas disconnection by a Gas Safe engineer typically costs £60–£95 if you would like us to arrange it. Send a list of appliances and a few photos, and we will confirm one fixed price for the whole strip-out.
Where the appliances go
Each appliance goes to the right treatment route. Cookers, ovens, hobs, dishwashers and washing machines are recycled at authorised treatment facilities under the WEEE Regulations. Fridges and freezers go to specialist facilities that can safely recover refrigerants and the blowing agents in their insulation foam.
Because everything is carried by a registered waste carrier, your duty of care is covered. If you are a landlord or developer, ask for a waste transfer note for your records.
Common hold-ups and how to avoid them
The most common delay is an appliance that cannot be disconnected on the day. Gas cookers with no accessible isolation point, water valves seized solid with limescale and cooker cables buried in plaster all slow things down. Pulling each appliance forward a week ahead, if you safely can, shows you what is behind it and gives time to book the right trade.
The second is size. American-style fridge freezers and range cookers are sometimes fitted before internal doors or a kitchen island go in, and they will not leave the way they came. Measuring the narrowest point of the route, including door frames with the doors removed, tells you whether an appliance needs its doors taken off or a different exit. Mention any doubt when booking so the team arrive with the right tools and enough people.
Questions people also ask
Will kitchen fitters remove my old appliances?
Some do, often for an extra charge, and many do not handle gas or hardwired appliances at all. Check what is included in your fitter's quote. If they are only stripping out units and worktops, book appliance removal separately so the room is clear for day one.
How far ahead should I book appliance removal?
One to two weeks before the fitters start is sensible. That gives time to book a Gas Safe engineer and an electrician, defrost the fridge and sort out any problems such as seized valves. Shorter notice is often possible, but it limits your choice of time slot.
Can you remove the old fridge with the cooker?
Yes. Fridges and freezers are routinely removed in the same visit as cookers and other kitchen appliances. They need to be switched off, emptied and defrosted beforehand. They are routed separately to a facility that recovers refrigerants and insulation gases safely.
Written and checked by the Cooker Disposal team. Read our editorial policy.
More guides
How Much Does Cooker Disposal Cost in the UK?
Cooker disposal in the UK costs from £45 for a freestanding cooker that is already disconnected and easy to reach. Built-in single or double ovens…
How to Disconnect a Cooker: Gas, Electric and Who Can Do It
A gas cooker must be disconnected and capped by a Gas Safe registered engineer under the Gas Safety (Installation and Use) Regulations 1998. A…
How to Get Rid of an Old Cooker: UK Options Compared
To get rid of an old cooker in the UK, use the retailer's take-back service when you buy a new one, book a council bulky waste collection, take it to…
Built-In Oven and Hob Removal: A Practical Guide
A built-in oven is removed by isolating its power, unscrewing it from the housing through the side trim, sliding it forward and disconnecting the…
Get a free cooker disposal quote
Tell us what you need and we'll come back with a clear price.
Request a quote