Cooker Disposal glossary
The terms you'll come across, explained in plain English.
- Bayonet fitting
- A push-and-twist wall socket for a freestanding gas cooker's flexible hose. It looks simple, but disconnecting it is still gas work for a Gas Safe registered engineer.
- Capping
- Sealing an open gas or water supply pipe with an approved cap or plug once an appliance has been removed, then testing that it does not leak.
- Cooker connection outlet
- A wall plate where a hardwired electric cooker's cable is connected to its dedicated circuit. It sits low behind the cooker, out of sight.
- Cooker switch
- A large double-pole switch above the worktop that isolates the cooker circuit. Switching it off is a first step, but isolation for disconnection is done at the consumer unit.
- Dedicated circuit
- A circuit from the consumer unit that serves one high-power appliance, such as an electric cooker or induction hob, rather than sharing with sockets.
- Dual-fuel cooker
- A cooker with a gas hob and an electric oven. Removing it needs both a gas disconnection and electrical isolation.
- Fused spur
- A wall switch with a fuse that connects an appliance, often a built-in oven or extractor, to a socket circuit without using a plug.
- Gas Safe Register
- The official list of engineers legally allowed to work on gas appliances in Great Britain. Disconnecting and capping a gas cooker or hob must be done by someone on it.
- Hob clamps
- Small metal brackets screwed underneath the worktop that hold a hob down in its cut-out. They are released from inside the base unit.
- Oven housing
- The tall or under-counter kitchen cabinet that a built-in oven slides into. It has a fixed shelf and is designed to leave ventilation space behind the oven.
- Range cooker
- A wide freestanding cooker, typically 90cm to 110cm, with several ovens and a large hob. It is much heavier than a standard cooker and needs extra hands to move.
- Side trim
- The narrow frame around a built-in oven's front, through which fixing screws hold the oven into its housing. The screws are usually visible with the door open.
- Stability chain
- A short chain or bracket fixed from the back of a freestanding gas cooker to the wall, which stops it tipping forward if weight is put on the open oven door.
- WEEE Regulations
- The Waste Electrical and Electronic Equipment Regulations 2013, which require cookers, ovens and hobs to be collected separately and recycled at authorised facilities rather than landfilled.
- Worktop cut-out
- The opening cut in a kitchen worktop for a hob or sink. Its size must match the new appliance's installation drawing.
Get a free cooker disposal quote
Tell us what you need and we'll come back with a clear price.
Request a quote